Nuheat Membrane

Description:

Nuheat Membrane is a tile underlayment and uncoupling membrane.

Nuheat Membrane can replace a second layer of plywood/concrete board and reduces the risk of tile cracks caused by movement in the flooring assembly. When integrated with Nuheat Cable, the Nuheat Membrane system is a best-in-class integrated uncoupling, waterproofing, and floor heating solution. Nuheat Membrane eases the installation of Nuheat Cable by simplifying the installation process.

Specs:

Nuheat Membrane is a polypropylene sheet that is thermo-bonded to a non-woven polypropylene fabric on the underside. It is 0.22 inches thick, 39 inches wide and weighs 840 grams/ m²

Operating voltage: 120 V, 208 V, and 240 V

Power output: 10-15 watts per square foot (depending on wire spacing)

Minimum bending radius: 0.5 in (12 mm)

Maximum continuous exposure temperature: 194°F (90°C)

Minimum installation temperature:  50°F (10°C)

Heating cable: 2-wire, grounded, twisted pair with PVC outer jacket

Cold lead: 2-wire, 16-18 AWG plus ground braid; 10 ft (3 m) length

                              For more information click HERE.